The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 user programmable analog outputs.
The LC-1 is more accurate than conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 is ideal for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. With the LC-1, you can add additional wideband channels to your LM-1, convert an existing narrow-band gauge, or add wideband capabilities to your dyno. You can even tune individual cylinders by using multiple LC-1 kits.
The LC-1 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the LC-1's serial ports you can daisy-chain other Innovate devices such as the XD-16, AuxBox (LMA-3), DL-32, TC-4, and SSI-4.
LC-1 Wideband Controller The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 user programmable analog outputs. (View Video) The LC-1 is more accurate than conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 is ideal for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. With the LC-1, you can add additional wideband channels to your LM-1, convert an existing narrow-band gauge, or add wideband capabilities to your dyno. You can even tune individual cylinders by using multiple LC-1 kits. Key Features Only fully digital wideband controller. Auto calibration capability to compensate for changes in temperature, altitude, and sensor condition. Two user programmable analog outputs. Permanent install applications Cost effective individual cylinder tuning. Easy to upgrade. Includes LogWorks software The LC-1's analog outputs are compatible with dynamometer software, gauges, or virtually any brand of Data Acquisition hardware, such as: Accel Advanced Racing Technologies Advantage Motorsports AiM Sports ( MyChron) Altronics Autometer Competition Data Systems CORRSYS-DATRON Corsa Instruments Cygnus Data Star DTA Competition Engine Management Systems Dynamic Test Systems Dynocom DYNOmite (Land & Sea) EcuTek Edelbrock Qwik Data EFI Technology Electromotive Engine Management Systems Excalibur Solutions Brockway Engineering Fuel Air Spark Technology (FAST) FXL Data Haltech Engine Management Systems Harrison Engineering Holley Link ECU Microtech MoTeC Mustang Dynamometer Pi Research Powertrain Control Solutions Powertrain Electronics Race Technology Racepak RPM Performance SPA Technique Stack Stuska Dynamometers Superflow Traqmate Etc... The LC-1 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the LC-1's serial ports you can daisy-chain other Innovate devices such as the XD-16, AuxBox (LMA-3), DL-32, TC-4, and SSI-4. 1) The basic LC-1 kit ($199.99) includes the LC-1, sensor, cd which includes software and manuals, bung and plug, and a serial cable to connect to the PC.
2) The Standalone Gauge Kit ($399.99) includes the LC-1, sensor, XD-16 digital gauge, cd which includes software and manuals, bung and plug, and a serial cable to connect to the PC.
Installation of the LC-1 is relatively simple. Complete documentation is supplied, and the support pages, user forum, videos, application notes and tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products. Click here to find a dealer near you.